Two Engine Piston Kits Compatible with Briggs & Stratton 61 Cubic Inch Big Block V Twin Engines Replaces #841837 Models 611475, 611477, 613477, 613777, 61A277, 61A777, 61E177,61E477, 61E777, 61E877

Two Piston Kits 841837 Compatible with Briggs & Stratton Big Block V Twin Engines 61 Cubic Inch Block For All Models That Start With 61 That Use This Part Number, Please Verify Before Ordering. Compatible with the following Briggs & Stratton Models 611475, 611477, 613477, 613777, 61A277, 61A777, 61E177, 61E377, 61E477, 61E777, 61E877, 61E977

• This small engine piston is Compatible with Briggs and Stratton 61 cubic inch V Twin engines.
• MEASURE THE BORE BEFORE ORDERING - A caliper across the old piston crown settles which version of the engine you have, and it is the only test that does. Ordering by horsepower or by year is how the wrong part ends up on the bench, because the same machine was often built in more than one bore. The number this replaces is 841837.
• CHECK RING END GAP IN THIS CYLINDER - Not in the old one. Square the ring in the bore, measure the gap with a feeler, and check side clearance in the piston groove while you are there. A ring that is tight at operating temperature will break a land.
• WORK OUT WHY THE OLD ONE FAILED - A scored bore had a cause. A hardened crankshaft seal or a split impulse line leans the mixture out and will take the new piston the same way it took the old one. Pressure and vacuum test the crankcase before the machine goes back together.