Tune Up Kit Fits Husqvarna 288 281 61 Chainsaw

Tune up kit that fits the Husqvarna 61, 281 and 288 chainsaws: an air filter, a fuel filter and a spark plug. Check the model plate before ordering and compare the old air filter with the photos. Do all three at once, since a new plug behind a clogged filter fouls again and a clogged fuel filter starves the saw. Gap the plug to the service manual figure, thread it in by hand, and check the fuel and impulse lines for cracks while you are in there.

• TUNE UP KIT - An air filter, a fuel filter and a spark plug.
• FITS HUSQVARNA 61, 281 AND 288 - Check the model plate before ordering, and compare the old air filter with the photos.
• DO ALL THREE AT ONCE - A new plug behind a clogged air filter fouls again within a tank, and a clogged fuel filter starves the saw at full throttle. A tune up is only worth doing whole.
• SPARK PLUG - Check the gap against the service manual before fitting, thread it in by hand, and snug it rather than leaning on it.
• WHILE YOU ARE IN THERE - Check the fuel line where it leaves the tank for cracks, look at the impulse line, and clean the packed sawdust out of the flywheel and cylinder fins.