65mm Ring Set Fits Kawasaki FH381V FH430V 13008-7001

One standard 65mm piston ring set for one cylinder of the Kawasaki FH381V or FH430V V-twin; both cylinders need two sets. It replaces 13008-7001, which replaced the older 13008-6062. For a standard 65mm bore only. Rings will not seal a scored, glazed or out-of-round bore, so measure taper and out of round, hone lightly for a crosshatch and check the end gap of each ring in its bore.

• ONE STANDARD 65MM RING SET - Top ring, second ring and oil ring for one cylinder. These are V-twins, so both cylinders need two sets.
• FITS KAWASAKI FH381V AND FH430V - Both on the 65mm standard bore. Read the model on the blower housing before ordering.
• REPLACES 13008-7001 - Which replaced the older 13008-6062, so either number gets you here.
• STANDARD BORE ONLY - For a 65mm bore. A cylinder that has been bored oversize needs the ring set for its size.
• CHECK THE BORE FIRST - Rings will not seal a scored, glazed or out-of-round bore. Measure taper and out of round, hone lightly for a crosshatch, and check end gap in the bore each ring will run in.