Piston Kit Fits Jonsered 2095, 2094, Husqvarna K950, Partner K950 Concrete Saws, 56mm

Piston Kit Fits Jonsered 2095, 2094, Husqvarna K950, Partner K950 Concrete Saws, 56mm

• Piston Kit Fits Jonsered 2095, 2094, Husqvarna K950, Partner K950 Concrete Saws, 56mm
• MEASURE THE BORE BEFORE ORDERING - A caliper across the old piston crown settles which version of the engine you have, and it is the only test that does. Ordering by horsepower or by year is how the wrong part ends up on the bench, because the same machine was often built in more than one bore.
• CHECK RING END GAP IN THIS CYLINDER - Not in the old one. Square the ring in the bore, measure the gap with a feeler, and check side clearance in the piston groove while you are there. A ring that is tight at operating temperature will break a land.
• WORK OUT WHY THE OLD ONE FAILED - A scored bore had a cause. A hardened crankshaft seal or a split impulse line leans the mixture out and will take the new piston the same way it took the old one. Pressure and vacuum test the crankcase before the machine goes back together.
• ON ASSEMBLY - Use a ring compressor, fit the circlips with the open end away from the ports, and hone the bore so the rings have a surface to bed into. Turn the engine over by hand before the first start.