Gasket Set Fits Briggs Vanguard 993cc Big Block 841122

A complete gasket set with seals for the Briggs & Stratton Vanguard Big Block V-twin of 993cc (60.6 cubic inches), 33 to 40 HP. The set contains the head gaskets, valve cover gaskets, intake and exhaust gaskets, crankshaft seals and the oil pan gasket. It replaces gasket set 841122 and oil pan gasket 846037, and fits models 611475, 611477, 613477, 613777, 61A277, 61A777, 61E177, 61E377, 61E477, 61E777, 61E877 and 61E977, whose model numbers start with 61. The 895cc (54.6 cubic inch) Big Block shares the 86mm bore but has a shorter stroke and usually a model number starting with 54; check the engine label before ordering. On installation, clean every sealing face to bare metal, tighten the heads in the sequence and to the torque in the service manual, and drive the crank seals in square.

• FULL GASKET SET WITH SEALS - Head gaskets, valve cover gaskets, intake and exhaust gaskets, crankshaft seals and the oil pan gasket: everything needed to reseal the engine.
• FITS THE 993CC BIG BLOCK V-TWIN - The 61 cubic inch (60.6), 33 to 40 HP engines: 611475, 611477, 613477, 613777, 61A277, 61A777, 61E177, 61E377, 61E477, 61E777, 61E877 and 61E977. Model numbers start with 61.
• NOT FOR THE 895CC VERSION - The 895cc (54.6 cu in) Big Block has the same 86mm bore but a shorter stroke, and its model numbers usually start with 54. Check the model number or displacement on the engine label.
• REPLACES 841122 AND 846037 - Gasket set 841122 and oil pan gasket 846037. If your parts list shows these numbers, this set covers them.
• INSTALLATION - Clean every sealing face down to bare metal, tighten the heads in the sequence and to the torque in the service manual, and fit the crank seals with a driver so they go in square.