{"product_id":"rebuild-kit-fits-briggs-vanguard-35-ci-72mm-843792-pr-ap75-i92s","title":"Rebuild Kit Fits Briggs Vanguard 35 CI 72mm 843792","description":"\u003cp\u003eA rebuild kit for the Briggs \u0026amp; Stratton Vanguard V-twins of 570cc, 35 cubic inch, on a standard 72mm bore: the 16, 18 and 20 HP engines. The kit contains two standard 72mm pistons with three-piece ring sets (843792), two connecting rods (807900-S), the complete gasket set with crankshaft seals (84010902, which superseded 841188), two spark plugs, two oil filters, one fuel filter and 4 oz of engine assembly lube. It does not fit the 23 or 25 HP Vanguard, which is 627cc on a 75.5mm bore and takes piston 843805. Valves, valve springs, stem seals, lifters, camshaft and the oil pump are not included. Standard bore only: if the block has been bored oversize these pistons will not seal, so mic the bore at the top of ring travel first. Read the model, type and code stamped on the blower housing before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWHAT IS IN THE BOX - Two standard 72mm pistons with three-piece ring sets (843792), two connecting rods (807900-S), the complete gasket set with crankshaft seals (84010902, which superseded 841188), two spark plugs, two oil filters, one fuel filter and 4 oz of engine assembly lube.\u003c\/li\u003e\n\u003cli\u003eFITS 570CC VANGUARD V-TWINS ON A 72MM STANDARD BORE - The 16, 18 and 20 HP engines, 35 cubic inch. Read the model, type and code off the blower housing and confirm the bore before ordering.\u003c\/li\u003e\n\u003cli\u003eNOT FOR THE 23 OR 25 HP - Those are 627cc on a 75.5mm bore and take piston 843805, not 843792. Ordering by the horsepower badge is the fastest way to end up with a kit that will not go in. Check the bore.\u003c\/li\u003e\n\u003cli\u003eNO VALVES IN THIS KIT - Valves, valve springs, stem seals, lifters, camshaft and the oil pump are not included. If the valves are burnt or the guides worn, get those on the bench before you start.\u003c\/li\u003e\n\u003cli\u003eSTANDARD BORE ONLY - MEASURE FIRST - If the block has been bored oversize these pistons will not seal. Mic the bore at the top of ring travel before you order, and torque rod and head bolts to the service manual figures.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lil Red Barn","offers":[{"title":"Default Title","offer_id":68009655173274,"sku":"PR-AP75-I92S","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/2346\/6909\/files\/61WVqjQwdfL.jpg?v=1793383323","url":"https:\/\/performancesawsupply.com\/products\/rebuild-kit-fits-briggs-vanguard-35-ci-72mm-843792-pr-ap75-i92s","provider":"Performance Saw Supply","version":"1.0","type":"link"}